Mostrando resultados 1 a 8 de 8
  1. #1
    Registrado
    marzo-2015
    Location
    France
    Posts
    15

    Predeterminado My crazy project(don't forget).

    If you want to know in detail the bike that we see in the movie "Easy Rider." (This will not be a chopper).
    You know the Harley Davidson brand name, I invite you to discover a unique machine participating in its construction parts after parts.


    Just here it goes:

    http://panhead51.eklablog.com/

  2. #2
    Registrado
    octubre-2011
    Posts
    170

    Predeterminado

    So, do you want to build a replica of easy rider's bike?

  3. #3
    Registrado
    marzo-2015
    Location
    France
    Posts
    15

    Predeterminado

    Quote Originalmente publicado por 70c4n1 Ver post
    So, do you want to build a replica of easy rider's bike?
    No, i just want to build a panhead like origin .

  4. #4
    Registrado
    octubre-2011
    Posts
    170

    Predeterminado

    i was looking at your blog, nicely equipped workshop you have!
    Have you already dissasemble that switch? it seems to me that a good soak on penetrating oil (Wd40, Liquid wrench or better) would you the job, from the backside there appear to be some sort of retaining clips (the wire ones).
    A better translation for "hubs" into spanish would be "masa" or "eje de rueda"
    Are you replacing the frame tubing for a special reason?

    good look in your project!

  5. #5
    Registrado
    marzo-2015
    Location
    France
    Posts
    15

    Predeterminado

    Unfortunately I have no workshop and I did not disassemble the switch yet because I have not yet purchased the key. I put WD40.
    Me and my friend we think we need the key to dismantle the system.
    In part, it lacks the back I have to build.

  6. #6
    Registrado
    noviembre-2009
    Posts
    146

    Predeterminado

    Do you have any pictures???

  7. #7
    Registrado
    marzo-2015
    Location
    France
    Posts
    15

    Predeterminado

    Quote Originalmente publicado por Ricardo Gonzalez Ver post
    Do you have any pictures???
    I fixed the switch, it is on the blog.
    In the "Repair of small parts".

  8. #8
    Registrado
    marzo-2015
    Location
    France
    Posts
    15

    Predeterminado

    Z0f7ldmNZI9YWyJlcuytRXXuimo.jpg
    IMG_20170606_171132 reduction.jpg
    With some difficulties, I finished repairing my frame.

Reglas del foro

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •